Horizontal Overhang: Use the two fields on either side of the drawing to define the arch overhang on the right and left side of the opening. Niche below Arch: Check this box to create a niche (or inset) beneath the arch. If it is not checked, then you can use the field below to define the distance between the arch and the header. Using the fields on the right side of the dialog box, set the height and depth values for the arch the depth of any hole behind it (“Rear Hold Depth”) and the arch projection horizontally, if any.Īrch on Header: Check this box to place the arch directly atop the opening header. Keystone: For arch styles with a keystone, set values for its width, oversize (if the keystone extends vertically above the arch) and projection (if it protrudes horizontally from arch). Note: Using brick arches in a large number of windows may increase your model size significantly. If you choose Brick, you can set values for the Brick and Mortar thicknesses below. The rest of the controls vary depending on the arch you choose here. Masonry Arch: Check this box, then choose a style for the arch from the drop-down menu. Archicad 23 is a 64-bit application that requires: Windows 10, or macOS 10.14 Mojave, macOS 10.13 High Sierra Check our detailed system requirements 2 Download and install Archicad Download Archicad and follow the on-screen prompts or check the detailed installation instructions to install Archicad. The following is a description of the Masonry Arch tab page of the Custom Settings Panel of Door or Window Settings, from the INT ARCHICAD Library.

Archicad 23 youtube